TOOL ROOM ALL GEARED
LATHE MACHINE
| SPECIFICATIONS | PIONEER GHL-250 |
| Height of Centre (mm) | 250 |
| Swing Over Bed (mm) | 500 |
| Swing Over Cross Slide (mm) | 290 |
| Distance Between Center (mm) | 1000/1500 |
| Max. Swing in Gap (mm) | 770 |
| BED | |
| Bed Type | 2 V and 2 Flat |
| Bed Width (mm) | 355 |
| Length of Gap in Front of Face Plate (mm) | 160 |
| HEAD STOCK | |
| Number of Spindle Speed | 18 |
| Spindle Speed Range : R.P.M. | 32 to 1600 (Std.) 40 to 2000 (Optni.) |
| Type and Size of Spindle Nose | Cam Lock, size 6" |
| Spindle Bore (mm) | 55mm |
| Spindle Taper Number | MT – 6 |
| Diameter of Front Bearing | OD 150 x ID 85 |
| FEEDS AND THREADS | |
| Number of Feeds | 76 |
| Range of Longitudinal Feeds (mm/Rev) | 0.037 to 1.34 |
| Range of Cross Feeds (mm/rev) | 0.016 to 0.58 |
| Number of Threads | 106 |
| Range of Metric Threads/No. | 0.2 to 7 mm (33) |
| Range of Inch Threads, No. | 72 to 4 T.P.I. (36) |
| Range of Module Threads/No. | 0.3 to 3 Module (16) |
| Range of D.P. Threads/No. | 44 to 8 D.P. (21) |
| Leed Screw Dia (mm) | 38.1 |
| Leed Screw Pitch (mm) | 6 mm |
| SADDLE | |
| Cross Slide Dimension (mm) | 250 x 500 |
| Cross Slide Travel (mm) | 325 |
| Tool Shank Section (mm) | 25 x 25 |
| Saddle Traverse (mm) | 890/1390 |
| Compound Slide Traverse (mm) | 150 |
| TAIL STOCK | |
| Spindle Dia (mm) | 63.5 |
| Spindle Taper Number | MT-4 |
| Spindle Travel | 200 |
| Lateral Move to Tail Stock (mm) | 5 |
| MOTOR | |
| Main Motor (Kw.) | 3.75 (5 H.P.) |
| MODEL | FLOOR SPACE (APPROX.) | WEIGHT KGS. (APPROX.) | CASE DIMENSIONS | |||
| NET | GROSS | L | W | H | ||
| GHL-5 | 2800 x 1000 mm | 1800 | 2100 | 3000 | 1100 | 1600 |
| GHL-6 | 3300 x 1000 mm | 2100 | 2400 | 3500 | 1100 | 1600 |
STANDARD ACCESSORIES:
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray, Oil Gun, Tool kit, Manual Book.
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray, Oil Gun, Tool kit, Manual Book.
EXTRA ACCESSORIES:
Collet attachment & collets, Taper Turning Attachment, Rear Tool Post, Electro-Mechanical Brake with Joy Stick Control, Machine Lamp, Chuck Flange, Face plate, Follow Rest, Steady Rest, Quick change Tool Post, Coolant Pump & Fitting, Carrier Plate, Rear Splash Guard, True Chuck, Dog Chuck, Digital Read out System (DRO).
Collet attachment & collets, Taper Turning Attachment, Rear Tool Post, Electro-Mechanical Brake with Joy Stick Control, Machine Lamp, Chuck Flange, Face plate, Follow Rest, Steady Rest, Quick change Tool Post, Coolant Pump & Fitting, Carrier Plate, Rear Splash Guard, True Chuck, Dog Chuck, Digital Read out System (DRO).
Note:
(1)All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2)The Description “standard accessories / salient features” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.
(1)All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2)The Description “standard accessories / salient features” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.