EXTRA HEAVY DUTY ALL GEARED
LATHE MACHINE
| SPECIFICATIONS | PIONEER GHL-300 |
| Height of Centre (mm) | 300 |
| Swing Over Bed (mm) | 600 |
| Swing Over Cross Slide (mm) | 370 |
| Distance Between Center (mm) | 1000/1500/2000/2500/3000/3500/4000 |
| Max. Swing in Gap (mm) | 850 |
| BED | |
| Bed Type | 2 V & 2 Flat |
| Bed Width (mm) | 355 |
| Length of Gap in Front of Face Plate (mm) | 150 |
| HEAD STOCK | |
| Number of Spindle Speeds | 12 |
| Spindle Speed Range : R.P.M. | 27 to 700 (Std.) 45 to 1200 (Optni.) |
| Type & Size of Spindle Nose | A/2 – 8 |
| Spindle Bore (mm) | 80mm |
| Spindle Taper Number | MT – 6 |
| Diameter of Front Bearing | OD 200 x ID 110 |
| FEEDS AND THREADS | |
| Number of Feeds | 72 |
| Range of Longitudinal Feeds (mm/Rev) | 0.037 to 1.34 |
| Range of Cross Feeds (mm/rev) | 0.016 to 0.58 |
| Number of Threads | 105 |
| Range of Metric Threads/No. | 0.2 to 7 mm (33) |
| Range of Inch Threads, No. | 72 to 4 TPI (36) |
| Range of Module Threads/No. | 0.4 to 3 Module (15) |
| Range of D.P. Threads/No. | 44 to 8 D.P. (21) |
| Leed Screw Dia (mm) | 38.1 |
| Leed Screw Pitch (mm) | 6mm |
| SADDLE | |
| Cross Slide Dimension (mm) | 250 x 500 |
| Cross Slide Travel (mm) | 325 |
| Tool Shank Section (mm) | 25 x 25 |
| Saddle Traverse (mm) | 900/1400/1900/2400/2900/3400/3900 |
| Compound Slide Traverse (mm) | 150 |
| TAIL STOCK | |
| Spindle Dia (mm) | 63.5 |
| Spindle Taper Number | MT – 4 |
| Spindle Travel | 200 |
| Lateral Move to Tail Stock (mm) | 5 |
| MOTOR | |
| Main Motor (Kw.) | 5.5 (7.5 H.P.) Std. / 7.5 (10 H.P.) Optni. |
| MODEL | FLOOR SPACE (APPROX.) | WEIGHT KGS. (APPROX.) | CASE DIMENSIONS | |||
| NET | GROSS | L | W | H | ||
| GHL-11 | 2700 x 1100 mm | 2100 | 2400 | 2900 | 1200 | 1800 |
| GHL-12 | 3200 x 1100 mm | 2250 | 2550 | 3400 | 1200 | 1800 |
| GHL-13 | 3800 x 1100 mm | 2700 | 3000 | 4000 | 1200 | 1800 |
| GHL-14 | 4400 x 1100 mm | 3000 | 3400 | 4600 | 1200 | 1800 |
| GHL-15 | 4900 x 1100 mm | 3300 | 3750 | 5100 | 1200 | 1800 |
| GHL-16 | 5400 x 1100 mm | 3600 | 4000 | 5600 | 1200 | 1800 |
STANDARD ACESSORIES:
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-4 Dead Centers, Electric Motor with Electrical controls, Thread Dial Indicator, Chip Tray, Oil Gun, Tool kit, Manual Book.
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-4 Dead Centers, Electric Motor with Electrical controls, Thread Dial Indicator, Chip Tray, Oil Gun, Tool kit, Manual Book.
EXTRA ACCESSORIES:
14″ Center height in Lieu of standard, Face Plate, Taper Turning Attachment, Electro-Mechanical Brake with Joy Stick Control, Rear Tool Post with Long Cross Slide, Keyway Cutting Attachment, Chuck Flange 10″, Chuck Flange 12″, Follow Rest 12″, Steady Rest 12″, Quick change Tool Post with Tool Holders, Coolant pump with fittings, Rear Splash Guard, Carrier Plate, True Chuck, Dog Chuck, Digital Read out System (DRO).
14″ Center height in Lieu of standard, Face Plate, Taper Turning Attachment, Electro-Mechanical Brake with Joy Stick Control, Rear Tool Post with Long Cross Slide, Keyway Cutting Attachment, Chuck Flange 10″, Chuck Flange 12″, Follow Rest 12″, Steady Rest 12″, Quick change Tool Post with Tool Holders, Coolant pump with fittings, Rear Splash Guard, Carrier Plate, True Chuck, Dog Chuck, Digital Read out System (DRO).
Note:
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description ” standard accessories / salient features ” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description ” standard accessories / salient features ” confirms to its list not the photo of models shown in the catalogue and subject to change without prior notice as improvements are made from time to time.